Skip to content

1/14 RC EC300e Excavator/Bagger

468918385_9112646925461509_4019787077414381345_n.jpg 1/14 RC EC300e Excavator/Bagger
468838921_9112633528796182_4308801246957030255_n.jpg 1/14 RC EC300e Excavator/Bagger
468918385_9112646925461509_4019787077414381345_n.jpg 1/14 RC EC300e Excavator/Bagger
468402247_9112633585462843_1873380140395489339_n.jpg 1/14 RC EC300e Excavator/Bagger
9.png 1/14 RC EC300e Excavator/Bagger
10.jpg 1/14 RC EC300e Excavator/Bagger
5.png 1/14 RC EC300e Excavator/Bagger
6.png 1/14 RC EC300e Excavator/Bagger
7.png 1/14 RC EC300e Excavator/Bagger
8.png 1/14 RC EC300e Excavator/Bagger
Capture.png 1/14 RC EC300e Excavator/Bagger
1.jpg 1/14 RC EC300e Excavator/Bagger
Counterweight 1.stl 1/14 RC EC300e Excavator/Bagger
Counterweight Plate 2.stl 1/14 RC EC300e Excavator/Bagger
Counterweight Plate 1.stl 1/14 RC EC300e Excavator/Bagger
Big Idle Roller.stl 1/14 RC EC300e Excavator/Bagger
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (2 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
6 files (STL and ZIP) Close
  • 14 Volvo EC300.zip
    • Bill of Materials.txt
    • EC300E Instructions.pdf
    • Pics/1.JPG
    • Pics/Capture.PNG
    • Pics/Instruction/1.PNG
    • Pics/Instruction/10.5.PNG
    • Pics/Instruction/10.PNG
    • Pics/Instruction/11.PNG
    • Pics/Instruction/12.PNG
    • Pics/Instruction/13.PNG
    • Pics/Instruction/14.PNG
    • Pics/Instruction/15.PNG
    • Pics/Instruction/16.PNG
    • Pics/Instruction/17.PNG
    • Pics/Instruction/18.PNG
    • Pics/Instruction/19.PNG
    • Pics/Instruction/2.PNG
    • Pics/Instruction/20.1.PNG
    • Pics/Instruction/20.2.PNG
    • Pics/Instruction/20.3.5.PNG
    • Pics/Instruction/20.3.PNG
    • Pics/Instruction/20.4.PNG
    • Pics/Instruction/20.5.PNG
    • Pics/Instruction/20.PNG
    • Pics/Instruction/21.PNG
    • Pics/Instruction/22.PNG
    • Pics/Instruction/23.PNG
    • Pics/Instruction/24.PNG
    • Pics/Instruction/25.PNG
    • Pics/Instruction/26.PNG
    • Pics/Instruction/27.PNG
    • Pics/Instruction/28.PNG
    • Pics/Instruction/29.PNG
    • Pics/Instruction/3.PNG
    • Pics/Instruction/4.PNG
    • Pics/Instruction/5.PNG
    • Pics/Instruction/6.PNG
    • Pics/Instruction/7.PNG
    • Pics/Instruction/8.PNG
    • Pics/Instruction/9.PNG
    • STLs/Arm/5mm Pin Hold x8.stl
    • STLs/Arm/Bolt Together Arms/Left Boom 1 B.stl
    • STLs/Arm/Bolt Together Arms/Left Boom 2 B.stl
    • STLs/Arm/Bolt Together Arms/Left Boom 3 B.stl
    • STLs/Arm/Bolt Together Arms/Left Stick B.stl
    • STLs/Arm/Bolt Together Arms/Plugs/A X8.stl
    • STLs/Arm/Bolt Together Arms/Plugs/B X2.stl
    • STLs/Arm/Bolt Together Arms/Plugs/C .stl
    • STLs/Arm/Bolt Together Arms/Plugs/D.stl
    • STLs/Arm/Bolt Together Arms/Plugs/E .stl
    • STLs/Arm/Bolt Together Arms/Plugs/F.stl
    • STLs/Arm/Bolt Together Arms/Plugs/I x2.stl
    • STLs/Arm/Bolt Together Arms/Plugs/J x2.stl
    • STLs/Arm/Bolt Together Arms/Plugs/M x2.stl
    • STLs/Arm/Bolt Together Arms/Right Boom 1 B.stl
    • STLs/Arm/Bolt Together Arms/Right Boom 2 B.stl
    • STLs/Arm/Bolt Together Arms/Right Boom 3 B.stl
    • STLs/Arm/Bolt Together Arms/Right Stick B.stl
    • STLs/Arm/Boom Cylinder Mount v2.stl
    • STLs/Arm/Boom Cylinder Mount x2.stl
    • STLs/Arm/Boom Pin Hold x2.stl
    • STLs/Arm/Hose Guides/Line Guide 2 x2.stl
    • STLs/Arm/Hose Guides/Line Guide 4 x2.stl
    • STLs/Arm/Hose Guides/Line Guide 5 x4.stl
    • STLs/Arm/Hose Guides/Line Guide.stl
    • STLs/Arm/Hose Guides/Stick Hose Guide x2.stl
    • STLs/Arm/Left Boom 1.stl
    • STLs/Arm/Left Boom 2.stl
    • STLs/Arm/Left Boom 3.stl
    • STLs/Arm/Left Stick.stl
    • STLs/Arm/Right Boom 1.stl
    • STLs/Arm/Right Boom 2.stl
    • STLs/Arm/Right Boom 3.stl
    • STLs/Arm/Right Stick.stl
    • STLs/Bucket/Bucket Left Bottom.stl
    • STLs/Bucket/Bucket Left Side Tooth.stl
    • STLs/Bucket/Bucket Left.stl
    • STLs/Bucket/Bucket Link Inner.stl
    • STLs/Bucket/Bucket Right Bottom.stl
    • STLs/Bucket/Bucket Right Side Tooth.stl
    • STLs/Bucket/Bucket Right.stl
    • STLs/Bucket/Bucket Tooth x5.stl
    • STLs/Bucket/Lower Bucket Link 1 x2.stl
    • STLs/Bucket/Manual Quick Coupler/Hook.stl
    • STLs/Bucket/Manual Quick Coupler/Quick Coupler L Inside.stl
    • STLs/Bucket/Manual Quick Coupler/Quick Coupler Outside 1 x2.stl
    • STLs/Bucket/Manual Quick Coupler/Quick Coupler R Inside.stl
    • STLs/Bucket/Upper Bucket Link 1 x2.stl
    • STLs/Cab/Cab Door.stl
    • STLs/Cab/Cab Floor.stl
    • STLs/Cab/Cab Front Rail.stl
    • STLs/Cab/Cab Rear Light Mount.stl
    • STLs/Cab/Cab Rear Rail.stl
    • STLs/Cab/Cab Rock Guard.stl
    • STLs/Cab/Chair Main.stl
    • STLs/Cab/Driver Door Volvo.stl
    • STLs/Cab/Inside Wall.stl
    • STLs/Cab/Left Armrest.stl
    • STLs/Cab/Left Controls.stl
    • STLs/Cab/Outside Wall.stl
    • STLs/Cab/Plate Light Housing.stl
    • STLs/Cab/Rear.stl
    • STLs/Cab/Right Armrest.stl
    • STLs/Cab/Right Controls.stl
    • STLs/Cab/Top Rock Guard.stl
    • STLs/Cab/Top.stl
    • STLs/Cab/Upper Band Inside.stl
    • STLs/Cab/Upper Band.stl
    • STLs/Cab/Window Templates/Driver Window 2.stl
    • STLs/Cab/Window Templates/Driver Window.stl
    • STLs/Cab/Window Templates/Front Window.stl
    • STLs/Cab/Window Templates/ Window 2.stl
    • STLs/Cab/Window Templates/ Windwo.stl
    • STLs/Cab/Window Templates/Rear Windwo.stl
    • STLs/Cab/Window Templates/Upper Window.stl
    • STLs/House/Air Intake.stl
    • STLs/House/Air Tank.stl
    • STLs/House/Deck 1.stl
    • STLs/House/Deck 2.stl
    • STLs/House/Door Mesh.stl
    • STLs/House/Driver Rear Door 2.stl
    • STLs/House/Driver Rear Door.stl
    • STLs/House/Exhaust Lid 2.stl
    • STLs/House/Exhaust Lid.stl
    • STLs/House/Handrails/Long Rail.stl
    • STLs/House/Handrails/Rail 1.stl
    • STLs/House/Handrails/Rail 2.stl
    • STLs/House/Handrails/Rail 3.stl
    • STLs/House/Handrails/Rail Mount x7.stl
    • STLs/House/Lid 3.stl
    • STLs/House/Lower Step.stl
    • STLs/House/Oil Lid x2.stl
    • STLs/House/ Rear Door.stl
    • STLs/House/ Tank Cover Inner Wall.stl
    • STLs/House/ Tank Cover Main.stl
    • STLs/House/ Tank Cover Outer Wall.stl
    • STLs/House/ Tank Cover Upper Step.stl
    • STLs/House/Tank Box Lid.stl
    • STLs/House/Upper Step.stl
    • STLs/Lower Frame/Bottom Frame.stl
    • STLs/Lower Frame/KingPin Bottom.stl
    • STLs/Lower Frame/KingPin Top.stl
    • STLs/Lower Frame/KingPin.stl
    • STLs/Lower Frame/Pinion Gear 15T.stl
    • STLs/Lower Frame/Ring Gear 78T.stl
    • STLs/Lower Frame/Slew Bearing Housing.stl
    • STLs/Lower Frame/Slew Bearing Spacer.stl
    • STLs/Lower Frame/Tracks/Drive Sprocket 15T x2.stl
    • STLs/Lower Frame/Tracks/Driver Inside Track Guide.stl
    • STLs/Lower Frame/Tracks/Driver Motor Mount.stl
    • STLs/Lower Frame/Tracks/Driver Outside Track Guide.stl
    • STLs/Lower Frame/Tracks/Lower Idle Roller x9.stl
    • STLs/Lower Frame/Tracks/ Inside Track Guide.stl
    • STLs/Lower Frame/Tracks/ Motor Mount.stl
    • STLs/Lower Frame/Tracks/ Outside Track Guide.stl
    • STLs/Lower Frame/Tracks/Tensioner Housing x2.stl
    • STLs/Lower Frame/Tracks/Track Guide Hole Cover x4.stl
    • STLs/Lower Frame/Tracks/Track Pad x80.stl
    • STLs/Lower Frame/Tracks/Track Pin Clamp x36.stl
    • STLs/Lower Frame/Tracks/Undercarriage Cap.stl
    • STLs/Lower Frame/Tracks/Upper Idle Roller x4.stl
    • STLs/Lower Frame/Tracks/Upper Roller Spacer x4.stl
    • STLs/Lower Frame/Undercarriage Cap.stl
    • STLs/Lower Frame/Weight Cover 2.stl
    • STLs/Lower Frame/Weight Cover.stl
    • STLs/Upper Frame/Counterweight/Counterweight 1.stl
    • STLs/Upper Frame/Counterweight/Counterweight 2.stl
    • STLs/Upper Frame/Counterweight/Counterweight Inside Cover Half.stl
    • STLs/Upper Frame/Counterweight/Counterweight Inside Cover.stl
    • STLs/Upper Frame/Counterweight/Counterweight Inside Extension 2 x3.stl
    • STLs/Upper Frame/Counterweight/Counterweight Inside Extension x3.stl
    • STLs/Upper Frame/Counterweight/Counterweight Plate 1.stl
    • STLs/Upper Frame/Counterweight/Counterweight Upper 1.stl
    • STLs/Upper Frame/Counterweight/Counterweight Upper 2.stl
    • STLs/Upper Frame/Frame/Arm Pivot 1.stl
    • STLs/Upper Frame/Frame/Arm Pivot 2.stl
    • STLs/Upper Frame/Frame/Arm Pivot 3.stl
    • STLs/Upper Frame/Frame/Arm Pivot 4.stl
    • STLs/Upper Frame/Frame/Driver Side Upper Frame 2.stl
    • STLs/Upper Frame/Frame/Driver Side Upper Frame.stl
    • STLs/Upper Frame/Frame/Inner Wall 1.stl
    • STLs/Upper Frame/Frame/Inner Wall 2.stl
    • STLs/Upper Frame/Frame/ Upper Rear Frame.stl
    • STLs/Upper Frame/Frame/Plate 1.stl
    • STLs/Upper Frame/Frame/Plate 2.stl
    • STLs/Upper Frame/Frame/Plate 3.stl
    • STLs/Upper Frame/Frame/Plate 4.stl
    • STLs/Upper Frame/Hydraulic Mounts/Ali Pump Tank Mount.stl
    • STLs/Upper Frame/Hydraulic Mounts/Valve Mount.stl
    • STLs/Upper Frame/Hydraulic Mounts/Valve Splitter Mount.stl
  • Big Idle Roller.stl
  • Counterweight 1.stl
  • Counterweight Plate 1.stl
  • Counterweight Plate 2.stl
  • Updates.zip
    • Bucket Left Bottom v3.stl
    • Bucket Right Bottom v3.stl
    • Inside Track Guide.stl
    • Motor Mount.stl
    • Outside Track Guide.stl
    • Upper Band Inside.stl
    • Upper Band.stl

Learn more about the formats
Last update 2025-03-16 at 16:13
Publication date 2025-01-02 at 18:10
Design number 2608456
mbudz10

mbudz10

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

Here is a RC excavator in 14 scale. I have tried to keep it as realistic as possible. The model pictured weighs in just under 21lbs/10kgs with the option to add more weight. All doors can open and close to access any part of the insides. More than enough room for sound controller and speaker as well as 3-8 channel valves. Track pads are printed, use metal reinforcement via roller chain and have a working automatic tensioning system. Plate and Arms are reinforced with metal as well. All parts can be sourced from AliExpress.

my Facebook group for more information on this model as well as any of my other models

https://www.facebook.com/groups/659931459464021

Instructions and Bill of Materials can be found here before purchasing

https://drive.google.com/file/d/1FBpgfXx0LeOrmTOyqwhDVMMWZIsqR8VZ/view?usp=drive_link

3D printing settings

.4 Nozzle
.2 Layer Height
4 Walls/Shells
4 Top and Bottom Layers
40% Infill
Some prints will require s

Categories

Education

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.