Skip to content

1/14 RC Mini Excavator/Bagger KX 080-4

1.jpg 1/14 RC Mini Excavator/Bagger KX 080-4
2.jpg 1/14 RC Mini Excavator/Bagger KX 080-4
3.jpg 1/14 RC Mini Excavator/Bagger KX 080-4
4.jpg 1/14 RC Mini Excavator/Bagger KX 080-4
5.jpg 1/14 RC Mini Excavator/Bagger KX 080-4
Dimensions-1.jpg 1/14 RC Mini Excavator/Bagger KX 080-4
Dimensions-2.jpg 1/14 RC Mini Excavator/Bagger KX 080-4
Kubota-KX080-Buckets.jpg 1/14 RC Mini Excavator/Bagger KX 080-4
Kubota-KX080-Final-v2.jpg 1/14 RC Mini Excavator/Bagger KX 080-4
Kubota-KX080-Interior-v2.jpg 1/14 RC Mini Excavator/Bagger KX 080-4
Kubota-KX080-Rear-Side-v2.jpg 1/14 RC Mini Excavator/Bagger KX 080-4
Takeuchi-TB68s-Final-2.jpg 1/14 RC Mini Excavator/Bagger KX 080-4
Takeuchi-TB68s-Final-1.jpg 1/14 RC Mini Excavator/Bagger KX 080-4
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (2 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
1 file (ZIP) Close
  • 14 Kubota KX-080.zip
    • Bill of Materials.txt
    • Instructions/1.JPG
    • Instructions/10.JPG
    • Instructions/11.JPG
    • Instructions/12.JPG
    • Instructions/13.JPG
    • Instructions/14.JPG
    • Instructions/15.JPG
    • Instructions/16.JPG
    • Instructions/17.JPG
    • Instructions/18.JPG
    • Instructions/19.JPG
    • Instructions/2.JPG
    • Instructions/3.JPG
    • Instructions/4.JPG
    • Instructions/5.JPG
    • Instructions/6.JPG
    • Instructions/7.5.JPG
    • Instructions/7.JPG
    • Instructions/8.JPG
    • Instructions/9.JPG
    • Instructions/Upgraded Undercarriage.JPG
    • Pictures/70206560871__06334F95-1ACE-4C22-A18E-7F351BB6AEEA.JPG
    • Pictures/70208892306__34E19E5E-2C0F-4B2E-8884-D13409BAF741.JPG
    • Pictures/70224055473__36C74FC4-746D-4FCE-B875-C8116A274B08.JPG
    • Pictures/Back Side.JPG
    • Pictures/Capture.JPG
    • Pictures/Dimensions 1.JPG
    • Pictures/Dimensions 2.JPG
    • Pictures/Front Side.JPG
    • Pictures/IMG_5092.JPG
    • Pictures/IMG_5093.JPG
    • STLs/Aliexpress Linear Actuator Arm/Arm Swivel Ali.stl
    • STLs/Aliexpress Linear Actuator Arm/Left Side Boom Ali.stl
    • STLs/Aliexpress Linear Actuator Arm/Left Side Stick Ali.stl
    • STLs/Aliexpress Linear Actuator Arm/Right Side Boom Ali.stl
    • STLs/Aliexpress Linear Actuator Arm/Right Side Stick Ali.stl
    • STLs/Arm/3mm Pin Hold.stl
    • STLs/Arm/4mm Pin Hold.stl
    • STLs/Arm/Arm Light Body.stl
    • STLs/Arm/Arm Light Rear Cover.stl
    • STLs/Arm/Arm Pin .stl
    • STLs/Arm/Arm Swivel v2.stl
    • STLs/Arm/Boom Front Wire Guide .stl
    • STLs/Arm/Boom Small Wire Guide .stl
    • STLs/Arm/Boom Wire Guide 10.stl
    • STLs/Arm/Left Side Boom.stl
    • STLs/Arm/Left Side Stick.stl
    • STLs/Arm/Right Side Boom.stl
    • STLs/Arm/Right Side Stick.stl
    • STLs/Arm/Stick Wire Guide .stl
    • STLs/Arms for Hydraulics/Console v2.stl
    • STLs/Arms for Hydraulics/Left Side Boom Hyd v2.stl
    • STLs/Arms for Hydraulics/Left Side Boom Hyd.stl
    • STLs/Arms for Hydraulics/Left Side Stick Hyd.stl
    • STLs/Arms for Hydraulics/Right Side Boom Hyd v2.stl
    • STLs/Arms for Hydraulics/Right Side Boom Hyd.stl
    • STLs/Arms for Hydraulics/Right Side Stick Hyd.stl
    • STLs/Blade/Blade Arm Driver.stl
    • STLs/Blade/Blade Arm .stl
    • STLs/Blade/Blade.stl
    • STLs/Bruder Track Mod/Bruder Idle Roller.stl
    • STLs/Bruder Track Mod/Bruder Track (Design by Rebizov).stl
    • STLs/Bruder Track Mod/Bruder track drives (Design by Len Basiliere).stl
    • STLs/Bruder Track Mod/Driver Inside Track Guide 050 Bruder Tracks.stl
    • STLs/Bruder Track Mod/idler.stl
    • STLs/Bucket/12 inch Bucket With Teeth.stl
    • STLs/Bucket/24 inch Bucket No Teeth.stl
    • STLs/Bucket/24 inch Bucket With Teeth.stl
    • STLs/Bucket/48 Inch Bucket No Teeth.stl
    • STLs/Bucket/Bucket Lever 1 Mirror.stl
    • STLs/Bucket/Bucket Lever 1.stl
    • STLs/Bucket/Bucket Lever 2 Mirror.stl
    • STLs/Bucket/Bucket Lever 2.stl
    • STLs/Bucket/Bucket Lever V2.stl
    • STLs/Bucket/Ripper 2.stl
    • STLs/Bucket/Ripper `1.stl
    • STLs/Bucket/Spacer.stl
    • STLs/Bucket/Thumb/Thumb 1.stl
    • STLs/Bucket/Thumb/Thumb 2.stl
    • STLs/Bucket/Thumb/Thumb Spacer.stl
    • STLs/Cab/Door.stl
    • STLs/Cab/Driver Side Cab.stl
    • STLs/Cab/Front Cab.stl
    • STLs/Cab/ Side Cab.stl
    • STLs/Cab/Roof.stl
    • STLs/Chassis/050 Slew Motor Mount v2.stl
    • STLs/Chassis/Driver Inside Track Guide 050.stl
    • STLs/Chassis/Driver Main Frame 1 050 Motor.stl
    • STLs/Chassis/Driver Motor Mount 050 Motor.stl
    • STLs/Chassis/Electronics Box.stl
    • STLs/Chassis/King Pin Plate.stl
    • STLs/Chassis/King Pin.stl
    • STLs/Chassis/One Piece Undercarriage.stl
    • STLs/Chassis/ Inside Track Guide 050.stl
    • STLs/Chassis/ Main Frame 1 050 Motor.stl
    • STLs/Chassis/ Motor Mount 050 Motor.stl
    • STLs/Chassis/Slew Gear.stl
    • STLs/Chassis/Spur Gear (15 teeth) v2.stl
    • STLs/D.I.Y Actuators/Boom Cylinder 62.5mm.stl
    • STLs/D.I.Y Actuators/Bucket Cylinder 50mm.stl
    • STLs/D.I.Y Actuators/Cap .stl
    • STLs/D.I.Y Actuators/Main 1 50mm.stl
    • STLs/D.I.Y Actuators/Main 1 76.5mm.stl
    • STLs/D.I.Y Actuators/Main 2 50mm.stl
    • STLs/D.I.Y Actuators/Main 2 76.5mm.stl
    • STLs/D.I.Y Actuators/Rod End.stl
    • STLs/D.I.Y Actuators/Stick Cylinder 76.5mm.stl
    • STLs/Details/Driver Mirror Bar.stl
    • STLs/Details/Driver Mirror Mount.stl
    • STLs/Details/Driver Mirror.stl
    • STLs/Details/Front Light Lens.stl
    • STLs/Details/Handle.stl
    • STLs/Details/Kubota Decal v2.stl
    • STLs/Details/Kubota Emblem v1.stl
    • STLs/Details/KX080 Logo.stl
    • STLs/Details/ Mirror Bar.stl
    • STLs/Details/ Mirror Mount.stl
    • STLs/Details/ Mirror.stl
    • STLs/Details/Rear Decal.stl
    • STLs/Details/Rear Mirror Bar.stl
    • STLs/Details/Rear Mirror.stl
    • STLs/House/Air Intake Cover.stl
    • STLs/House/Arm Swivel Mount.stl
    • STLs/House/Back Main House .stl
    • STLs/House/Bay Lid.stl
    • STLs/House/Engine Bay Cover.stl
    • STLs/House/Engine Intake Cover.stl
    • STLs/House/Front Main House.stl
    • STLs/House/House Main.stl
    • STLs/House/Plate Bigger N20 Motor v2.stl
    • STLs/House/Rear Upper House Main.stl
    • STLs/Interior/Arm Rest.stl
    • STLs/Interior/Chair.stl
    • STLs/Interior/Console.stl
    • STLs/Interior/Floor v2.stl
    • STLs/Manual Quick Coupler/Hook .stl
    • STLs/Manual Quick Coupler/Inside Left .stl
    • STLs/Manual Quick Coupler/Inside Right .stl
    • STLs/Manual Quick Coupler/Outside x2.stl
    • STLs/Running Gear/Big Idle Roller.stl
    • STLs/Running Gear/Driver Glue Cover.stl
    • STLs/Running Gear/Driver Inside Track Guide.stl
    • STLs/Running Gear/Driver Outside Track Guide.stl
    • STLs/Running Gear/Idle Wheel Spacer.stl
    • STLs/Running Gear/ Inside Track Guide.stl
    • STLs/Running Gear/ Outside Track Guide.stl
    • STLs/Running Gear/enger Glue Cover.stl
    • STLs/Running Gear/Rear Glue Cover.stl
    • STLs/Running Gear/Small Idle Roller.stl
    • STLs/Running Gear/Track Gear.stl
    • STLs/Running Gear/Track.stl
    • STLs/Running Gear/Upper Idle Wheel Spacer.stl
    • STLs/Running Gear/Windshield Glue Cover.stl
    • STLs/Takeuchi/Air Filter.stl
    • STLs/Takeuchi/Back Door.stl
    • STLs/Takeuchi/Back House Hinge 1.stl
    • STLs/Takeuchi/Back House.stl
    • STLs/Takeuchi/Door Hinge 1.stl
    • STLs/Takeuchi/Door.stl
    • STLs/Takeuchi/Driver Side Cab.stl
    • STLs/Takeuchi/Exhaust.stl
    • STLs/Takeuchi/Filler 1.stl
    • STLs/Takeuchi/Filler 2.stl
    • STLs/Takeuchi/Front Cab.stl
    • STLs/Takeuchi/Fuel Tank.stl
    • STLs/Takeuchi/ Side.stl
    • STLs/Takeuchi/Roof.stl
    • STLs/Takeuchi/Takeuchi Plate.stl
    • STLs/Takeuchi/Top Light.stl
    • STLs/Windows/Door Window.stl
    • STLs/Windows/Driver Rear Window.stl
    • STLs/Windows/ Window.stl
    • STLs/Windows/Rear Window.stl
    • STLs/Windows/Windshield.stl
    • New Instructions/KX 080-4 Instructions V2.pdf
    • New Instructions/Pictures/1.PNG
    • New Instructions/Pictures/10.PNG
    • New Instructions/Pictures/11.PNG
    • New Instructions/Pictures/12.PNG
    • New Instructions/Pictures/13.PNG
    • New Instructions/Pictures/14.PNG
    • New Instructions/Pictures/15.5.PNG
    • New Instructions/Pictures/15.PNG
    • New Instructions/Pictures/16.PNG
    • New Instructions/Pictures/17.PNG
    • New Instructions/Pictures/18.PNG
    • New Instructions/Pictures/19.PNG
    • New Instructions/Pictures/2.PNG
    • New Instructions/Pictures/20.PNG
    • New Instructions/Pictures/21.PNG
    • New Instructions/Pictures/22.PNG
    • New Instructions/Pictures/23.PNG
    • New Instructions/Pictures/24.PNG
    • New Instructions/Pictures/25.PNG
    • New Instructions/Pictures/26.PNG
    • New Instructions/Pictures/27.PNG
    • New Instructions/Pictures/28.PNG
    • New Instructions/Pictures/29.PNG
    • New Instructions/Pictures/3.PNG
    • New Instructions/Pictures/4.PNG
    • New Instructions/Pictures/5.PNG
    • New Instructions/Pictures/6.PNG
    • New Instructions/Pictures/7.PNG
    • New Instructions/Pictures/8.PNG
    • New Instructions/Pictures/9.PNG
    • Old Instructions/1.JPG
    • Old Instructions/10.JPG
    • Old Instructions/11.JPG
    • Old Instructions/12.JPG
    • Old Instructions/13.JPG
    • Old Instructions/14.JPG
    • Old Instructions/15.JPG
    • Old Instructions/16.JPG
    • Old Instructions/17.JPG
    • Old Instructions/18.JPG
    • Old Instructions/19.JPG
    • Old Instructions/2.JPG
    • Old Instructions/3.JPG
    • Old Instructions/4.JPG
    • Old Instructions/5.JPG
    • Old Instructions/6.JPG
    • Old Instructions/7.5.JPG
    • Old Instructions/7.JPG
    • Old Instructions/8.JPG
    • Old Instructions/9.JPG
    • Old Instructions/Quick Coupler.JPG
    • Old Instructions/Upgraded Undercarriage.JPG
    • Old Instructions/Wiring Diagram.JPG
    • Pictures/Cylinders.JPG
    • Pictures/Electronics Box pic.JPG
    • Pictures/magom.JPG
    • Pictures/Pump.JPG
    • Pictures/Valve.JPG
    • STLs/Arm/3mm Pin Hold x10.stl
    • STLs/Arm/4mm Pin Hold x10.stl
    • STLs/Arm/Aliexpress Linear Actuator Arm/Arm Swivel Ali.stl
    • STLs/Arm/Aliexpress Linear Actuator Arm/Left Side Boom Ali.stl
    • STLs/Arm/Aliexpress Linear Actuator Arm/Left Side Stick Ali.stl
    • STLs/Arm/Aliexpress Linear Actuator Arm/Right Side Boom Ali.stl
    • STLs/Arm/Aliexpress Linear Actuator Arm/Right Side Stick Ali.stl
    • STLs/Arm/Arm Light Body x2.stl
    • STLs/Arm/Arm Light Rear Cover x2.stl
    • STLs/Arm/Arm Pin x7.stl
    • STLs/Arm/Arms for AliExpress Hydraulics/Arm Swivel Hyd.stl
    • STLs/Arm/Arms for AliExpress Hydraulics/Inside Hyd Mount.stl
    • STLs/Arm/Arms for AliExpress Hydraulics/Left Side Boom Ali Hyd.stl
    • STLs/Arm/Arms for AliExpress Hydraulics/Left Side Stick Ali Hyd.stl
    • STLs/Arm/Arms for AliExpress Hydraulics/Right Side Boom Ali Hyd.stl
    • STLs/Arm/Arms for AliExpress Hydraulics/Right Side Stick Ali Hyd.stl
    • STLs/Arm/Arms for Magom Hydraulics/Console v2.stl
    • STLs/Arm/Arms for Magom Hydraulics/Magom Left Side Boom Hyd v2.stl
    • STLs/Arm/Arms for Magom Hydraulics/Magom Left Side Stick Hyd.stl
    • STLs/Arm/Arms for Magom Hydraulics/Magom Right Side Boom Hyd v2.stl
    • STLs/Arm/Arms for Magom Hydraulics/Magom Right Side Stick Hyd.stl
    • STLs/Arm/Boom Front Wire Guide x2.stl
    • STLs/Arm/Boom Small Wire Guide x2.stl
    • STLs/Arm/Boom Wire Guide 10 x2.stl
    • STLs/Arm/DIY Left Side Boom.stl
    • STLs/Arm/DIY Left Side Stick.stl
    • STLs/Arm/DIY Right Side Boom.stl
    • STLs/Arm/DIY Right Side Stick.stl
    • STLs/Arm/Stick Wire Guide x2.stl
    • STLs/Bruder Track Mod/34mm Idler (use with printed bruder track).stl
    • STLs/Bruder Track Mod/36mm Idler (use with bought tracks).stl
    • STLs/Bruder Track Mod/Bruder Track Kingpin.stl
    • STLs/Bruder Track Mod/Bruder Track Ring Gear.stl
    • STLs/Bucket/24in Bucket With Teeth Hyd.stl
    • STLs/Bucket/48in Bucket No Teeth Hyd.stl
    • STLs/Chassis/050 Plate.stl
    • STLs/Chassis/Bottom Plug.stl
    • STLs/Chassis/Main Frame.stl
    • STLs/Chassis/Ring Gear.stl
    • STLs/D.I.Y Actuators/Stick Cylinder 82mm.stl
    • STLs/House/Electronics Box.stl
    • STLs/Running Gear/Big Idle Roller X2.stl
    • STLs/Running Gear/Small Idle Roller X10.stl
    • STLs/Takeuchi/Left Side Boom Takeuchi.stl
    • STLs/Takeuchi/Right Side Boom Takeuchi.stl
    • STLs/Window Templates/Door Window.stl
    • STLs/Window Templates/Driver Rear Window.stl
    • STLs/Window Templates/ Window.stl
    • STLs/Window Templates/Rear Window.stl
    • STLs/Window Templates/Windshield.stl

Learn more about the formats
Last update 2024-12-30 at 00:29
Publication date 2024-02-26 at 22:08
Design number 1818231
mbudz10

mbudz10

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

1/14 Mini Excavator/Bagger modeled after a Kubota KX 080-4. It uses DIY actuators, Ali actuators you can buy online or Hydraulic cylinders. Tracks are TPU or Bruder "metal" tracks that can be bought or printed. Features 2 different body variations, a quick coupler, 4 separate buckets, a working thumb, unlimited rotation, working 2 way blade, working cabin door, lights and ball bearings.

my Facebook group for more information on this model as well as any of my other models

https://www.facebook.com/groups/659931459464021

Instructions and Bill of Materials can be found here before purchasing

https://drive.google.com/file/d/16bJZKb28_hjMgmA5aXyrMiB_mIWI8MvP/view?usp=drive_link

Dimensions:

Top of Cab- 183.86mm
Cab Width- 158.68mm
Track to Track Width- 150mm
Height to Top of Track- 42mm
Transport Length- 446.27mm
Track Width- 35mm
Blade Width- 150mm
Cabin Width- 73mm

Instructions, Bill of Materials and all files included.

3D printing settings

.4 Nozzle
.2 Layer Height for main parts
.12 Layer Height for detailed parts
1.2-2mm Wall/Shells
1-2mm Top and Bottom Layers
40-60% Infill
s may be needed for some parts

Categories

Sports & outdoor

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi πŸ’œ.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.