MAKITA SP6000J PLA GUIDE with rail MAKITA DEPTH STOP easy version

𝐄𝐍𝐆𝐋𝐈𝐒𝐇

Guide and Depth Stop Spacer for MAKITA, Easy Version

PLA versions, slim, double indicator with or without a red rail on SP6000J + MAKITA 1400mm Rail

No calculations between the height of the wood and the zero of the rail. You can directly select the height of the wood.

Simply place the tip of the depth guide on the desired measurement. This version has been revisited for even simpler operation.

USAGE

Take the thickness of your board. Our board measures 29mm in the photos.

Adjust the cutting depth using our guide. Note, there are 2 indicators for with and without MAKITA rail.

Tighten the depth screw.

Cut.

𝐀𝐒𝐒𝐄𝐌𝐁𝐋𝐘

For installation, you need to completely remove the screw from the depth indicator, then attempt reassembly. If it seems difficult, you will need to remove the metric casing to insert our guide, which will be positioned between the tightening screw and the metric casing.

𝐅𝐑𝐀𝐍𝐂̧𝐀𝐈𝐒

Spacer depth guide and stop for MAKITA, easy version

PLA, slim, double indicator versions with or without red color rail on SP6000J + 1400mm MAKITA rail

No calculation between wood height and rail zero. You can select the wood height directly.

Simply set the tip of the depth guide to the desired measurement. This version has been redesigned for even simpler operation.

USE

Take the thickness of your board. Our board measures 29mm in photos.

Adjust the cutting depth using our guide. Please note that there are 2 indicators with and without a MAKITA rail.

Tighten the depth screw.

Cut.

𝐌𝐎𝐍𝐓𝐀𝐆𝐄

To install, you need to remove the depth indicator screw completely, then attempt reassembly. If this seems difficult, you'll need to take out the metric housing to insert our guide, which will be between the clamping screw and the metric housing.

𝐄𝐒𝐏𝐀Ñ𝐎𝐋

Guía y tope de profundidad espaciador para MAKITA, versión fácil

Versiones en PLA, delgada, con doble indicador con o sin riel de color rojo en SP6000J + Riel MAKITA de 1400mm

Sin cálculos entre la altura de la madera y el cero del riel. Puedes seleccionar directamente la altura de la madera.

Simplemente coloca la punta de la guía de profundidad en la medida deseada. Esta versión ha sido revisada para un trabajo aún más sencillo.

𝐔𝐒𝐎

Toma el grosor de tu tabla. Nuestra tabla mide 29mm en las fotos.

Ajusta la profundidad de corte usando nuestra guía. Nota, hay 2 indicadores con riel y sin riel MAKITA.

Aprieta el tornillo de profundidad.

Corta.

𝐌𝐎𝐍𝐓𝐀𝐉𝐄

Para la instalación, necesitas retirar completamente el tornillo del indicador de profundidad y luego intentar el reensamblaje. Si te parece difícil, tendrás que sacar el cárter métrico para introducir nuestra guía que se posicionará entre el tornillo de apriete y el cárter métrico.

Printer :

Anycubic Mega X

Radeaux :

No

s:

No

Resolution:

0,2

Filling :

100%

Filament brand :

Standard

Filament color :

Red

Filament material :

PLA